The image below shows an iPro machine:
- Machines must be kept in a cool well ventilated environment to prevent the machine over heating
- The machine and tanks where possible must be kept away from direct sunlight, or any
other UV-Light sources to stop discoloration of product - Do not turn the machine off unless instructed to do so due to a service issue
- Clean the air filter weekly; this will keep the machine working to its optimum freezing capacity - you can find a guide to cleaning the filter here
- At the end of each trading day:
1) Spray sanitiser onto a damp cloth and wipe all the external surfaces of the freezer
2) Then use a dry cloth to wipe off any excess liquid
3) Take the drip tray off and clean separately. Spray with sanitiser and wipe clean. If tray is heavily soiled it may need to be immersed in hand-hot water or run under hand-hot water
4) Dry the drip tray and refit
Cleaning during/after re-filling product:
- During re-filling of the tanks, ensure the tank lids are wiped with a clean cloth prior to removing, then finish cleaning them properly on a clean work surface. The top lid should not be immersed in water during cleaning
- Once the top lid has been removed, then remove the inner tank lid. This can then be washed and
cleaned under warm water with a clean cloth - Prior to filling, wipe away any excess product marks inside the tank with a CLEAN cloth. Once cleaned, remove cloth, fill tank with product and refit both the internal lid and the top lid. Once the top lid has been fitted, the tank will commence stirring of product and will start to freeze product back to correct consistency
Whenever you have a question or need advice, we want to make sure you get the support you need - so don't hesitate to contact our customer support team by submitting a ticket through our website at the link below: