A Viper machine is shown in the images below:
Often caused by:
- The machine or barrels not being switched on
- Not enough space for ventilation around the machine
- Blocked air vents
- The machine being placed near a heat source
Quick checks:
- Ensure the machine is plugged in and switched 'ON'
- Check the barrels are switched on
- Make sure your machine has not been pushed back against the wall
- Make sure the vents on the side of the machine are not blocked, a minimum of 2" to the side and 12" above the machine are required
- Ensure heat sources are not placed alongside the machine - the machine must be well ventilated, with an ambient temperature of under 32°c
- Clean the condenser filter (lift front door for access)
- Check the barrel status lights, the barrel may be in defrost as shown in the image below:
Contact us!
If you have any questions or queries with which you are struggling with or need some assistance, please follow the link below to submit a ticket to our help center. One of our agents will be more than happy to help you from here! -