A Viper machine is shown in the images below:
Below you will find a handy video guide showing how to change the CO2:
If the contents gauge is in the red, the CO2 supply needs changing
Below is a guide advising how to change the CO2 supply for your machine
If it is a bulk supply check the contents gauge - call your supplier urgently if it is in red
Switch over to back up supply if bulk supply is exhausted
If it is a bottle supply do the following:
- Close the cylinder valve, and undo the hose nut with a CO2 spanner
- Remove the dust cover from the new CO2 cylinder
- Refit the nut to the new cylinder and tighten fully with spanner
- Secure the cylinder with the strap
- Open the valve on the CO2 cylinder slowly and fully
Contact us!
If you have any questions or queries with which you are struggling with or need some assistance, please follow the link below to submit a ticket to our help center. One of our agents will be more than happy to help you from here! -
https://frozen-store.zendesk.com/hc/en-us/requests/new