A G3 machine is shown in the image below, the machine has a screen:
A G2 machine is shown in the image below, the machine has a lid:
IMPORTANT: This machine is designed for use at a maximum air intake temp of 32°C.
Air intake temperature of 24°C to the machine will deliver the optimal performance capacity.
As the air intake temperature increases, the machine’s performance capacity decreases.
Air intake temperatures will be higher than room temperature if the machine is located near a heat source (e.g. next to a window, in direct sunlight, or close to high operating temperature machine like a pizza oven, deep fryer, coffee machine; or in an enclosed space or alcove.)
Clearance:
- 15cm minimum clearance around both sides of the machine
- 10cm minimum clearance at the rear of the machine
- 30cm minimum clearance above the machine
- Two machines side by side – 30cm minimum clearance between the machines